Arduino Genuino uno r3

Product introduction:

The Arduino Genuino 101 is the ideal successor to the UNO, with the latest technology in mind. And equipped with a six-axis accelerometer and gyroscope.Control side of your project, and can connect your phone via Bluetooth



Arduino Genuino uno r3 is an excellent low-voltage power development
board based on the Intel. Curie module. The price is very simple to use.Where buy cheap genuino r3? Factory cheap price!

101 not only has UNO-like features and peripherals, but also an additional Bluetooth LE and 6-axis meter. Tuo instrument can help you better release of creativity. Allowing you to easily connect pots with the physical world.

Module
contains an x86 quark core and a 32bit83ARC architecture core. Clock
frequency is 32MHz, intel cross-tool can be completed two core
development.
Intel
developed an instance of the bath for the system and development
framework will be in March 2016 open source, but then can not directly
with the 101 docking.
Can
only be manipulated through the arduinol core’s dynamic message box, so
only limited functionality can be used (and the PC interacts with the
USB interface, downloading the program to FLASH, using Bluetooth and
PWM), and the real-time operating system used by Curie
Development, the new features will be released in the near future.

101
with 14 I / Os (four of which can be used as PWM outputs), 6 analog
inputs, and one USB interface for serial communication and upload
programs.
1 power supply block. An ICSP interface with SPI and IIC pins has an I / O voltage of 3.3 V. However, it can withstand 41 volts.

Arduino 101 United States and Genuino 101 (outside of the United States) were developed by Arduino and Intel @


Technical specifications


Microcontroller     ATmega328
Operating Voltage     5V
Input Voltage (recommended)     7-12V
Input Voltage (limit)     6-20V
Digital I/O Pins     14
PWM Digital I/O Pins     6
Analog Input Pins     6
DC Current per I/O Pin     40 mA
DC Current for 3.3V Pin     50 mA
Flash Memory     32 KB
Flash Memory for Bootloader     0.5 KB
SRAM     2 KB
EEPROM     1 KB
Clock Speed     16 MHz



526889379048_4 genuino uno r3 genuino uno r3 genuino uno r3

Posted in Electronic components | Tagged , , , | Leave a comment

NodeMCU-32S Lua ESP-32S WiFi IOT Development Board ESP32S Dual-Core Wireless WIFI BLE Module Serial Port Internet of Things Eshinede.com

esp32 module 32762423496_1 32762423496_2 32762423496_3 32762423496_4 32762423496_5

Plug-and-play 32 GPIOs, each configured as PWM, I2C FCC & CE certified WiFi module with built-in antenna

NodeMCUIs an open source Internet of things platform. It is written in the Lua scripting language. The platform is based on the eLua open source project. The "NodeMCU-32S" is based on the ESP-32S module. The platform uses a number of open source projects, such as lua-cjson, spiffs. "NodeMCU-32S" contains can run on ESP32 Wi-Fi SoC chip firmware, and based on ESP-32S module hardware. ESP32 is Shanghai Espressif developed WiFi + Bluetooth chip, designed for embedded products to provide access to the network function.

 

"NodeMCU-32S" Is the letter based on ESP-32S module designed by the core development board. The development board continues the classic design of NodeMCU 1.0, leads to most of the I / O to the side of the pin, developers can connect peripherals according to their needs. When using the breadboard for development and debugging, the standard pin on both sides can make the operation more simple and convenient.

Posted in Electronic components | Tagged , , , , | Leave a comment